HIKVISION TURBO HD F1T Series Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION TURBO HD F1T Series. HIKVISION TURBO HD F1T Series 10 halaman. Turret camera
Juga untuk HIKVISION TURBO HD F1T Series: Panduan Pengguna (10 halaman)
Halaman Cetak
2.2.2 Ceiling/Wall Mounting with Gang Box
You need to purchase a gang box separately if you adopt celling
mounting.
Steps:
1. Take apart the gang box and align the screw holes of
the bullet camera and the gang box cover.
2. Route the cables through the cable hole of gang box
and fix the camera with the gang box cover with the
supplied screws, as shown in Figure 2-9.
Figure 2-9 Fix the Camera with the Gang Box
3. Drill the screw holes in the ceiling/wall according to
the supplied drill template.
4. Hammer the supplied screws into the screw holes to
fix the gang box to the ceiling/wall.
Figure 2-10 Fix the Camera to the Ceiling
5. Connect the corresponding cables and install the
gang box cover with fixing screws.
Figure 2-11 Fix the Camera to the Ceiling/Wall
6. Refer to step 5 of 2.2.1 to adjust the camera to get
an optimum angle.
Figure 2-8 Gang Box
Screw
Screw
Gang Box Cover