HIKVISION TURBO HD H0T Series Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION TURBO HD H0T Series. HIKVISION TURBO HD H0T Series 16 halaman. Turbo hd turret & dome camera
Juga untuk HIKVISION TURBO HD H0T Series: Panduan Pengguna (16 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (14 halaman)
Halaman Cetak
Figure 2-15 Drill Template of the Junction Box
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Take apart the junction box, and align the screw holes
of the turret camera's mounting base with those on
junction box's cover.
4. Fix the mounting base on junction box's cover by
supplied screws.
5. Secure the junction box's body with supplied screws
on the ceiling/wall.
6. Combine the junction box's cover with the junction
box's body.
Junction Box Body
7. Repeat steps 6 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to install the camera to the
junction box.
2.3.2 Wall Mounting
Before you start:
You need to purchase a wall mounting bracket separately.
Steps:
1. Drill four screw holes in the wall according to the
holes of the bracket.
2. Install the bracket to the wall by aligning the four
screw holes of the bracket with expansion screws on
the wall.
3. Secure the bracket with four hex nuts and washers.
Type I Camera
4. Install the mounting base of the turret camera to the
wall mounting bracket, and secure them with supplied
screws.
Figure 2-16 Fix the Gang Box
Figure 2-17 Install the Bracket
Junction Box Body
Junction Box Cover