HIKVISION TURBO HD U7T Series Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION TURBO HD U7T Series. HIKVISION TURBO HD U7T Series 15 halaman. Turret & dome camera
Juga untuk HIKVISION TURBO HD U7T Series: Panduan Pengguna (15 halaman), Panduan Pengguna (15 halaman)
Halaman Cetak
2.2 Wall Mounting of Type I Camera
Before you start:
You need to purchase a wall mount first.
Steps:
1. Drill 4 screw holes in the wall according to the holes of
the mount.
2. Attach the mount to the wall by aligning the 4 screw
holes of the mount.
3. Insert supplied expansion screws in the screw holes.
4. Secure the mount with 4 hex nuts and washers.
Figure 2-5 Install Wall Mounting Mount
5. Refer to step 3 of 2.1 Ceiling Mounting of Type I
Camera to remove dome camera's bubble and the
black liner.
6. Attach the back box/base plate of the dome camera to
the wall mount and secure them with supplied screws.
Figure 2-6 Attach the Base Plate to the Mount
7. Route the cables through the mount.
8.
steps 6 to 9 of the 2.1 Ceiling Mounting of Type
Repeat
I Camera to complete the installation.
2.3 Ceiling Mounting of Type II Camera
Before you start:
Both wall mounting and ceiling mounting are suitable for
the dome camera. Ceiling mounting will be taken as an
example in this section. And you can take steps of ceiling
mounting as a reference for wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on the
ceiling according to the supplied drill template.