HIKVISION TURBO HD U7T Series Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION TURBO HD U7T Series. HIKVISION TURBO HD U7T Series 15 halaman. Turret & dome camera
Juga untuk HIKVISION TURBO HD U7T Series: Panduan Pengguna (15 halaman), Panduan Pengguna (15 halaman)
Halaman Cetak
9. Tighten the screws on the bubble of the dome camera
to finish the installation.
2.4 Wall Mounting of Type II Camera
Before you start:
You need to purchase a wall mount first.
Steps:
1. Drill 4 screw holes in the wall according to the holes of
the mount.
2. Attach the mount to the wall by aligning the 4 screw
holes of the mount.
3. Insert supplied expansion screws in the screw holes.
4. Secure the mount with 4 hex nuts and washers.
5. Refer to step 3 of 2.3 Ceiling Mounting of Type II
Camera to remove dome camera's bubble.
6. Attach the back box of the dome camera to the wall
mount, and secure them with supplied screws.
Figure 2-14 Attach the Back Box to the Mount
Figure 2-11 Fit the Black Liner Back
Figure 2-12 Finish Installation
Figure 2-13 Install Wall Mount