DecoRad HandMate UV600 Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Konstruksi DecoRad HandMate UV600. DecoRad HandMate UV600 17 halaman. Ultimate tool for instantly curing uv (floor) coatings
Juga untuk DecoRad HandMate UV600: Panduan Cepat (2 halaman)
Halaman Cetak5. Error messages, shown on the display
Error
Description
E14 (TEMP)
Over-temperature
E15 (FAN)
Fan fail
E16 (SHUT)
Shutter error
E17
Temperature sensor
U51 (DIST)
Distance
U94 (TIME)
Time management
Solution
The UV lamp is too hot, leave the UV lamp 5 minutes to cool down. Turn
off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Leave the UV lamp 5 minutes to cool down, turn off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Leave the UV lamp to cool down, turn off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Leave the UV lamp to cool down, turn off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Please position the Handmate between 2 – 4 cm distance from the floor
UV curing is only possible at this distance.
Auto OFF after 5 minutes no use
Handmate UV 600 v. 2.4
15