Briteq BT-SUNRAY 130R Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Proyektor Briteq BT-SUNRAY 130R. Briteq BT-SUNRAY 130R 17 halaman. 130watt dtw blinder high cri expo projector

Halaman Cetak

ENGLISH

DESCRIPTION:

1. MAINS INPUT: equipped with original Neutrik PowerCON

PowerCON

extension cable here.

2. MAINS OUTPUT: used to daisy chain the power to several other projectors. Always pay attention to the

maximum load while adding projectors! Special Multi cables (PowerCON

optionally available: see our website!)

3. AIR PRESSURE VENT: for improved performance and service life, this special vent equalizes the

pressure inside the projector while blocking water and preventing condense from being formed.

4. DMX IN: 3pin XLR connector used to connect the projector with other units or a DMX-controller. The

DMX-input is also used to update the firmware of the projector, see the upgrade instructions on our

website.

5. DMX OUT: 3pin XLR connector used to daisy chain the projector with other units.

Remark: a separate modification kit ("BT-XLR3TO5 KIT" order code: 5523) is available to easily change

the current 3pin XLR-connectors into 5pin XLR-connectors: this takes only 2 minutes!)

6. DISPLAY & BUTTONS: alphanumeric OLED-display and backlit touch keys to select different options of

the setup MENU:

• MENU-button: used to enter/exit the setup MENU.

• ▼-button: used to go to the next MENU option or to decrease a parameter value.

• ▲-button: used to go to the previous MENU option or to increase a parameter value.

• ENTER-button: used to select a MENU option or confirm a setting.

Remark: to rotate the display over 180°, press the ▲-button while the standard display is shown.

BRITEQ

. Connect the supplied mains cable or any

3/12

OPERATION MANUAL

+ DMX XLR-cables are

BT-SUNRAY 130R