HIKVISION DS-2CE12HFT-E Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk DVR HIKVISION DS-2CE12HFT-E. HIKVISION DS-2CE12HFT-E 17 halaman. 5 mp colorvu poc camera
Juga untuk HIKVISION DS-2CE12HFT-E: Panduan Memulai Cepat (17 halaman)

Halaman Cetak

Rotation Position

[0° to 360°]

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

2.3 Installation of Type III Camera

2.3.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The installation of ceiling mounting and wall mounting

are similar. Following takes ceiling mounting as an

example.

Steps:

1. Disassemble the camera by rotating the camera to

align the notch to one of the marks, as shown in the

figure below.

2. Pry the mounting base by using a flat object, for

example, a coin.

3. Paste the drill template (supplied) to the place

where you want to install the camera.

4. Drill the screw holes and the cable hole (optional)

according to the drill template.

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

Figure 2-10 3-Axis Adjustment

Figure 2-11 Dissemble Camera

Figure 2-12 Pry Mounting Base

Figure 2-13 Drill Template

Pan Position

[0° to 360°]

Trim Ring

Tilt Position

[0° to 180°]

Screw A

Screw B