HIKVISION DS-2CE12HFT-E 사용자 설명서 - 페이지 11

{카테고리_이름} HIKVISION DS-2CE12HFT-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE12HFT-E 17 페이지. 5 mp colorvu poc camera
HIKVISION DS-2CE12HFT-E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄

Rotation Position

[0° to 360°]

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

2.3 Installation of Type III Camera

2.3.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The installation of ceiling mounting and wall mounting

are similar. Following takes ceiling mounting as an

example.

Steps:

1. Disassemble the camera by rotating the camera to

align the notch to one of the marks, as shown in the

figure below.

2. Pry the mounting base by using a flat object, for

example, a coin.

3. Paste the drill template (supplied) to the place

where you want to install the camera.

4. Drill the screw holes and the cable hole (optional)

according to the drill template.

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

Figure 2-10 3-Axis Adjustment

Figure 2-11 Dissemble Camera

Figure 2-12 Pry Mounting Base

Figure 2-13 Drill Template

Pan Position

[0° to 360°]

Trim Ring

Tilt Position

[0° to 180°]

Screw A

Screw B