IKEA IUD8500BX1 Panduan Petunjuk Instalasi - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Mesin pencuci piring IKEA IUD8500BX1. IKEA IUD8500BX1 26 halaman.

Connect wires black to black and white to white, using UL

Listed/CSA Approved twist-on wire connectors (not included).

Wiring

configuration

Power Supply wirei

jl box w, re:

White _white

ground wire _

ground connector

Tighten strain relief screws to secure cable.

Place wires inside terminal box. Insert tabs on left side of cover.

Make sure wires are tucked inside box. Close cover ensuring

wires are not pinched. Use a V4"hex head socket or nut driver and

previously removed screw to secure cover.

Check that dishwasher is still level front-to-back

and side-to-side

in cabinet opening.

Open dishwasher door, remove lower dish rack, and place towel

over pump assembly and lower spray arm of dishwasher. This will

keep screws from falling into pump area when you are securing

dishwasher to countertop.

NOTES:

•

Do not drop screws into bottom of dishwasher.

If side mounting, you must drill pilot holes in cabinet to avoid

splitting the wood before installing screws. Locate brackets

on top of dishwasher and secure dishwasher to countertop

with two #10 x 1/2"Phillips-head screws (included). The

dishwasher must be secured to keep it from shifting when

door is opened.