Makita 1923H Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 1923H. Makita 1923H 17 halaman. Power planer
Juga untuk Makita 1923H: Buku Petunjuk (13 halaman), Buku Petunjuk (18 halaman)

Halaman Cetak

1. Inside edge of gauge plate

2. Blade edge

3. Planer blade

4. Adjusting plate

5. Screws

6. Heel

7. Back side of gauge base

8. Gauge plate

9. Gauge base

1. Pan head screw

2. Adjusting plate

3. Planer blade locating lugs

4. Gauge plate

5. Heel of adjusting plate

6. Set plate

7. Inside flank of gauge plate

8. Gauge base

9. Back side of gauge base

10.Mini planer blade

002556

For tool with mini planer blades

Remove the existing blade, if the tool has been in use, carefully clean the

004887

drum surfaces and the drum cover. To remove the blades on the drum,

unscrew the three installation bolts with the socket wrench. The drum

cover comes off together with the blades.

To install the blades, loosely attach the adjusting plate to the set plate

with the pan head screws and set the mini planer blade on the gauge

base so that the cutting edge of the blade is perfectly flush with the inside

flank of the gauge plate.

Set the adjusting plate/set plate on the gauge base so that the planer

blade locating lugs on the set plate rest in the mini planer blade groove,

then press in the heel of the adjusting plate flush with the back side of the

gauge base and tighten the pan head screws.

002565

It is important that the blade sits flush with the inside flank of the gauge

plate, the planer blade locating lugs sit in the blade groove and the heel

of the adjusting plate is flush with the back side of the gauge base.

Check this alignment carefully to ensure uniform cutting.