Makita 3901 Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 3901. Makita 3901 16 halaman. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Juga untuk Makita 3901: Brosur (1 halaman), Buku Petunjuk (12 halaman), Buku Petunjuk (17 halaman)
Halaman Cetak
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user
-
as well as damage t o
the tool. If in doubt,
DO
NOT PLUG IN THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful t o the motor.
ADDITIONAL SAFETY RULES
1.
Use only the blades specified for this tool. This is extremely important for
2.
Never operate the tool with the blade locked in exposed position or without
3.
Make sure that the blade slides smoothly before operation.
4.
Check the blade for cracks or damage before operation. Replace cracked
5. Make sure that the flange fits in the arbor hole when installing the blade.
6. Inspect for and remove all nails or foreign matter from the workpieces be-
7. Always place the workpiece on a stable workbench.
8. Secure the workpiece firmly with clamp or vise.
9.
Never wear gloves during operation.
IO.
Hold the tool firmly with both hands.
1 1 .
Keep your hands and body away from the cutting area.
12.
Run the tool for a while without the blade pointing toward anybody. Watch
for vibration or wobbling that could indicate poor installation or a poorly
balanced blade.
13.
Never reach your hands underneath the workpieces while the blade is
rotating.
1 4 .
Do not leave the tool running unattended.
15.
Always be sure that the tool is switched off and unplugged before making
your personal safety.
the blade cover secured properly in place.
or damaged blade immediately.
fore operation.
any adjustments.
SAVE THESE INSTRUCTIONS.
4