Makita 4305 Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 4305. Makita 4305 20 halaman. Variable speed
Juga untuk Makita 4305: Panduan Pengguna (8 halaman)

Halaman Cetak

Finishing edges

To trim edges or make slight dimensional adjustments, run the blade lightly along the cut

edges.

'Of

For

4305

Metal cutting

Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause

significant blade wear. The underside of the workpiece can be greased instead of using a

coolant.

Plastic base plate

Use the plastic base plate when cutting

decorative veneers, plastics, etc. It protects

sensitive or delicate surfaces from damage.

To replace the base plate, remove the four

screws with the hex wrench.

Anti-splintering device

To reduce the potential for workpiece sur-

face splintering, the anti-splintering device

can be used. Fit

into the base from

below so that

surrounds the sides of the

blade.

Base

Anti-splintering device