Makita 4305 Gebrauchsanweisung - Seite 12
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Makita 4305 herunter. Makita 4305 20 Seiten. Variable speed
Auch für Makita 4305: Benutzerhandbuch (8 seiten)
Seite drucken
Finishing edges
To trim edges or make slight dimensional adjustments, run the blade lightly along the cut
edges.
'Of
I
For
4305
Metal cutting
Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause
significant blade wear. The underside of the workpiece can be greased instead of using a
coolant.
Plastic base plate
Use the plastic base plate when cutting
decorative veneers, plastics, etc. It protects
sensitive or delicate surfaces from damage.
To replace the base plate, remove the four
screws with the hex wrench.
Anti-splintering device
To reduce the potential for workpiece sur-
face splintering, the anti-splintering device
can be used. Fit
it
into the base from
below so that
it
surrounds the sides of the
blade.
Base
Base
Anti-splintering device
ef
12