Makita 4305 Gebrauchsanweisung - Seite 10
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Makita 4305 herunter. Makita 4305 20 Seiten. Variable speed
Auch für Makita 4305: Benutzerhandbuch (8 seiten)
Seite drucken
CAUTION :
Always hold the tool with the base flush with the workpiece. Failure to do so may cause
*Advance the tool very slowly when cutting curves or scrolling. Forcing the tool may
a
slanted cutting surface and blade breakage.
cause
a
slanted cutting surface and blade breakage.
Bevel cutting
CAUTION
:
Always unplug the tool before making any adjustments.
With the base tilted, you can make bevel
cuts
a t
any angle between 0" and 45' (left
or right). Loosen the bolt on the bottom of
the tool. Move the base so that the bolt is
positioned in the center of the cross-shaped
slot in the base.
Tilt the base until the desired bevel angle
i s
obtained. The edge of the motor housing
indicates the bevel angle by graduations.
Then tighten the bolt to secure the base.
Crossshaped
slot
Edge of motor housing
/ /
Base
Graduations
Flush cutting
Loosen the bolt on the bottom of the tool and slide the base all the way back. Then
tighten the bolt to secure the base.
For 4304
10