- ページ 10

電動工具 Makita 4305のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 4305 20 ページ。 Variable speed
Makita 4305 にも：ユーザーマニュアル (8 ページ)

CAUTION :

Always hold the tool with the base flush with the workpiece. Failure to do so may cause

*Advance the tool very slowly when cutting curves or scrolling. Forcing the tool may

slanted cutting surface and blade breakage.

cause

slanted cutting surface and blade breakage.

Bevel cutting

CAUTION

Always unplug the tool before making any adjustments.

With the base tilted, you can make bevel

cuts

a t

any angle between 0" and 45' (left

or right). Loosen the bolt on the bottom of

the tool. Move the base so that the bolt is

positioned in the center of the cross-shaped

slot in the base.

Tilt the base until the desired bevel angle

i s

obtained. The edge of the motor housing

indicates the bevel angle by graduations.

Then tighten the bolt to secure the base.

Crossshaped

slot

Edge of motor housing

/ /

Base

Graduations

Flush cutting

Loosen the bolt on the bottom of the tool and slide the base all the way back. Then

tighten the bolt to secure the base.

For 4304