ALIBI ALI-NS4028R Panduan Instalasi Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Kamera Keamanan ALIBI ALI-NS4028R. ALIBI ALI-NS4028R 6 halaman. Ip bullet cameras
Juga untuk ALIBI ALI-NS4028R: Panduan Instalasi Cepat (5 halaman)
Halaman Cetak
3.
Right click on the Internet Explorer tile, and then select More | Run as administrator.
To login to the camera from a computer on the same LAN:
1.
Open your Microsoft Internet Explorer (IE) browser on your computer and enter the IP address of
the camera in the URL field. In the example below, the IP address of the camera is 192.168.3.100.
2.
In the login window, enter admin for the User Name and the password you created in the
Password field, the click Login.
3.
If this is the first time you are logging into a camera, you may see the message in the following
screen. If this appears, follow the sub-steps below.
a.
Click on the message to install the plugin.
4
www.observint.com
b.
In the message bar at the bottom of the screen, click Run. Follow the on-screen
instructions to install WebComponents. When the following screen opens, click Finish.
Run as
administrator
Screen select tabs
Step 7.
Adjust the camera for your surveillance target
1.
While observing live video from your camera in the Live View tab (see above), loosen the Pan,
Tilt and Rotation lock screws at least two turns using the security L-wrench provided, then move
the camera to point at the center of your surveillance target. Tighten the lock screws to hold the
camera in position.
Tilt lock screw
Tilt: 0˚ ~ 100˚
2.
After adjusting the camera for the preferred field of view, click the Setup tab, and then click the
Image link in the left frame.
Adjust the Brightness Contrast, Saturation and Sharpness of the image as follows.
The Live View screen with the camera video image should appear.
Live View image
Pan lock screw - Pan: 0˚ ~ 360˚
Rotation lock screw
Rotation: 0˚ ~ 360˚
© 2017, 2018 Observint Technologies. All rights reserved.
Logout button
Capture, Record, Zoom icons