Makita 4340CT Informasi Teknis - Halaman 3

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita 4340CT. Makita 4340CT 16 halaman. Jig saw
Juga untuk Makita 4340CT: Buku Petunjuk (17 halaman), Spesifikasi (2 halaman), Buku Petunjuk (13 halaman)

Halaman Cetak

epair

< 2 > Disassembling tool opener

1. Separate base from the jig saw unit by unscrewing hex socket head bolt M5x18. See Fig. 1.

2. Unscrew pan head screw M4. Then tool opener and torsion spring 6 can be disassembled. See Fig. 1A.

< 3 > Assembling tool opener

1. Put torsion spring 6 into tool opener . And fasten tool opener with pan head screw M4. See Fig. 1A above.

2. Bring the tail of torsion spring 6 which is extruding from tool opener, to the original position by turning it

clockwise. See Fig. 2.

Gear

housing

Blade holder

Bottom view

(View from blade holder side)

< 4 > Disassembling handle section (Model 4340T / 4340CT / 4340FCT)

1. Separate handle R from handle L by unscrewing the following screws. See Fig. 3.

1 pc. of tapping screw 4x40,

1 pc. of tapping screw M4x50

5 pus. of tapping screws 4x8.

1 pc. of tapping screw M4x50

1 pc. of tapping screw 4x40,

Base

Hex socket head bolt M5x18

Fig. 1

Tool opener

The tail of

torsion spring 6

Gear housing cover

< Note in disassembling >

Handles R and L have spikes respectively for fixing on motor housing.

Be careful, not to break them, when disassembling.

5 pus. of tapping screws 4x8.

Fig. 2

Handle L

Fig. 3

Torsion spring 6

Tool opener

Pan head screw M4

Fig. 1A

The tail of torsion spring 6 pushed

into the original position.

P 3 / 16

Handle R