Makita 4350FCT Informasi Teknis - Halaman 8

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita 4350FCT. Makita 4350FCT 14 halaman. Jig saw
Juga untuk Makita 4350FCT: Spesifikasi (2 halaman), Perincian Bagian (3 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman)

Halaman Cetak

epair

[9] Disassembling parts in Gear housing

1. Do the disassembling steps of Gear housing cover as illustrated in Fig. 6.

2. While Locking Crank complete with 1R235, remove two M4x12 Hex socket head bolts. (Fig. 24)

Note: Two M4x12 Hex. socket head bolts are adhesive bolts. It is recommended to unscrew them with impact driver.

Fig. 24

Balance plate

3. Disassemble Retaining S-8 using 1R291. Then, the inner parts are disassembled from Gear housing as illustrated in Fig.25.

Fig. 25

Needle bearing 407

Note: Be careful not to lose Need bearing 407 when disassembling.

Retaining

ring S-8

1R235

Retaining ring S-8

Balance plate

Gear complete

Push plate

Seal plate

2 pcs. of M4x12

hex socket head bolts

Crank complete

Flat washer 8

Gear housing

P 8 / 14