Makita 4350FCT 기술 정보 - 페이지 8

{카테고리_이름} Makita 4350FCT에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4350FCT 14 페이지. Jig saw
Makita 4350FCT에 대해서도 마찬가지입니다: 사양 (2 페이지), 부품 분석 (3 페이지), 사용 설명서 (13 페이지), 사용 설명서 (13 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

epair

[9] Disassembling parts in Gear housing

1. Do the disassembling steps of Gear housing cover as illustrated in Fig. 6.

2. While Locking Crank complete with 1R235, remove two M4x12 Hex socket head bolts. (Fig. 24)

Note: Two M4x12 Hex. socket head bolts are adhesive bolts. It is recommended to unscrew them with impact driver.

Fig. 24

Balance plate

3. Disassemble Retaining S-8 using 1R291. Then, the inner parts are disassembled from Gear housing as illustrated in Fig.25.

Fig. 25

Needle bearing 407

Note: Be careful not to lose Need bearing 407 when disassembling.

Retaining

ring S-8

1R235

Retaining ring S-8

Balance plate

Gear complete

Push plate

Seal plate

2 pcs. of M4x12

hex socket head bolts

Crank complete

Flat washer 8

Gear housing

P 8 / 14