CORNING EDC-02P-NH Manual
Jelajahi secara online atau unduh pdf Manual untuk Kandang CORNING EDC-02P-NH. CORNING EDC-02P-NH 7 halaman. Environmental distribution center
Juga untuk CORNING EDC-02P-NH: Manual (12 halaman)
Halaman Cetak
• Visit http://www.corning.com/cablesystems/videos for additional information and videos.
• Visit www.corning.com/cablesystems/safety for full safety precautions.
EDC-02P-NH
1.
CARTON CONTENTS
• environmental Distribution Center (eDC) Housing with no holes
• Hardware Kit containing:
•
(1) Unit identification label
•
(1) Label, 2 x 12 position
•
(2) 8-32 x 0.5 inch phillips-head screws
•
(4) 12-24 x 0.5 inch phillips-head screws
•
(2) 6-32 Locknuts
•
(1) m6 washer
•
(2) U-shaped washers
•
(1) Quick release Latch Kit
2.
TOOLS REQUIRED
• phillips-head screwdriver
• Slotted screwdriver
• 5/16-inch (8 mm) socket or wrench
3.
ADDITIONAL MATERIALS (PURCHASED SEPARATELY)
may or may not be required depending on your application.
• Connector panels (CCH-CpXX-YY)
• (2) Cable entry port Fittings (eDC-2eC-KIt or eDC-2N4-KIt (NemA 4) or eDC-2Wt-KIt)
• mounting hardware appropriate for your installation
• Grounding kit (HDWr-GrND-KIt) for armored cable
• buffer tube Fan-Out kits (FAN-OD25-YY)
• pigtailed panels (CCH-CpXX-YY-p03ZZ)
• pigtailed modules (CCH-rmXX-YY-p03ZZ)
• Splice trays (2r or 4r for eDC-02p, 2S or 4S for others)
STANDARD RECOMMENDED PROCEDURE 003-304 | ISSUE 10 | September 2010 | PAGE 1 OF 7
Central Member Strain-Relief Bracket
Splice Tray Mounting Location
Sheath Retention Bracket
environmental
Distribution Center
(eDC-02p/06p/12p-NH)
p/n 003-304, Issue 10
Radius Control Guides
Fan-out Bracket
Drop Cable Strain-Relief Bracket
TPA-2904
Connector Panel Support Brackets
•
(2 feet) Spiral wrap
•
(4) Cable ties
•
(1) Self-sticking wire clip
•
(2) Self-sticking routing clips
•
(1) Universal Cable Clamp (UCC) kit
•
(1) UCC bracket
•
(1) buffer tube fan-out bracket
• Hole-Saw (2 3/8-inch or 1 3/8-inch)
• tape measure
• Side cutters