Makita 5477NB Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 5477NB. Makita 5477NB 12 halaman. Hypoid saw 185mm (7-1/4")
Juga untuk Makita 5477NB: Informasi Teknis (8 halaman)

Halaman Cetak

009234

90°

009235

Replacing carbon brushes

001145

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps.

009236

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

1. Adjusting screw

for 45 ﾟ

2. Adjusting screw

for 90 ﾟ

1. Triangular rule

45°

1. Limit mark

1. Screwdriver

2. Brush holder

cap

OPTIONAL ACCESSORIES

CAUTION:

These

accessories

•

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to

persons.

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

Steel & Carbide-tipped saw blades

•

General purpose blade for fast and smooth rip,

Combination

crosscuts and miters.

Pressure treated/

Designed for fast cutting of pressure treated and

Wet lumber

wet lumber.

006545

Rip fence (Guide rule)

•

Hex wrench

•

Hook

•

NOTE:

Some items in the list may be included in the tool

•

package as standard accessories. They may differ

from country to country.

attachments

Only use

accessory or

are