Makita 5477NB Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 5477NB. Makita 5477NB 12 pagina's. Hypoid saw 185mm (7-1/4")
Ook voor Makita 5477NB: Technische informatie (8 pagina's)
Pagina afdrukken
1
009234
90°
1
009235
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
009236
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
1. Adjusting screw
for 45 ﾟ
2
2. Adjusting screw
for 90 ﾟ
1. Triangular rule
45°
1. Limit mark
1
1. Screwdriver
2. Brush holder
1
cap
2
OPTIONAL ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Steel & Carbide-tipped saw blades
•
General purpose blade for fast and smooth rip,
Combination
crosscuts and miters.
Pressure treated/
Designed for fast cutting of pressure treated and
Wet lumber
wet lumber.
006545
Rip fence (Guide rule)
•
Hex wrench
•
Hook
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
9
or
attachments
Only use
accessory or
are