Makita 6905B Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 6905B. Makita 6905B 13 halaman. 12.7 mm (1/2")
Juga untuk Makita 6905B: Perincian Bagian (2 halaman), Buku Petunjuk (8 halaman), Buku Petunjuk (20 halaman), Buku Petunjuk (7 halaman), Buku Petunjuk (11 halaman), Buku Petunjuk (8 halaman)

FUNCTIONAL

DESCRIPTION

1. Switch trigger

ASSEMBLY

1. Socket

2. Anvil

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

002312

CAUTION:

•

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the "OFF"

position when released.

•

Change the direction of rotation only when the tool

comes to a complete stop. Changing it before the tool

stops may damage the tool.

The switch is reversible, providing either clockwise or coun-

terclockwise rotation. To start the tool, simply pull the lower

part of the switch trigger for clockwise or the upper part for

counterclockwise. Release the switch trigger to stop.

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Selecting correct socket

Always use the correct size socket for bolts and nuts. An

incorrect size socket will result in inaccurate and inconsistent

fastening torque and/or damage to the bolt or nut.

Installing or removing socket

002336

To install the socket, push it onto the anvil of the tool until it

locks into place.

To remove the socket, simply pull it off.

The proper fastening torque may differ depending upon the

kind or size of the bolt, the material of the workpiece to be

fastened, etc. The relation between fastening torque and fas-

tening time is shown in the figure.