Makita 6905B 사용 설명서 - 페이지 6
{카테고리_이름} Makita 6905B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6905B 13 페이지. 12.7 mm (1/2")
Makita 6905B에 대해서도 마찬가지입니다: 부품 분석 (2 페이지), 사용 설명서 (8 페이지), 사용 설명서 (20 페이지), 사용 설명서 (7 페이지), 사용 설명서 (11 페이지), 사용 설명서 (8 페이지)
페이지 인쇄
FUNCTIONAL
DESCRIPTION
1
1. Switch trigger
ASSEMBLY
1
2
1. Socket
2. Anvil
OPERATION
6
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
002312
CAUTION:
•
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
•
Change the direction of rotation only when the tool
comes to a complete stop. Changing it before the tool
stops may damage the tool.
The switch is reversible, providing either clockwise or coun-
terclockwise rotation. To start the tool, simply pull the lower
part of the switch trigger for clockwise or the upper part for
counterclockwise. Release the switch trigger to stop.
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and inconsistent
fastening torque and/or damage to the bolt or nut.
Installing or removing socket
002336
To install the socket, push it onto the anvil of the tool until it
locks into place.
To remove the socket, simply pull it off.
The proper fastening torque may differ depending upon the
kind or size of the bolt, the material of the workpiece to be
fastened, etc. The relation between fastening torque and fas-
tening time is shown in the figure.