Makita BJS100 Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita BJS100. Makita BJS100 12 halaman. Cordless metal shears 1.0mm (20ga)
Juga untuk Makita BJS100: Buku Petunjuk (8 halaman), Informasi Teknis (9 halaman)

Halaman Cetak
Makita BJS100 Buku Petunjuk
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Insert the top end of slotted bit screwdriver into the notch
in the tool and remove the holder cap cover by lifting it up.
2
3
010092
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
1
2
010093
Reinstall the holder cap cover on the tool.

Replacing blades

The service life of the blades varies in terms of the
workpiece to be cut. The following reference tables
indicate the approximate service life of the blades.
When the blades become dull, ask Makita Authorized
Service Centers to replace the blades.
For BJS160 and BJS161
Material
Mild steel plate
(SPCC)
Stainless steel plate
(SUS304)
Aluminum plate
(A-5052)
010094
For BJS100 and BJS101
Material
Mild steel plate
(SPCC)
Stainless steel plate
(SUS304)
010739
1. Brush holder
1
cover
2. Notch
3. Screwdriver
1. Brush holder
cap
2. Screwdriver
Cutting thickness
Life of blades
(mm)
1.6
200
1.2
150
2.5
400
Cutting thickness
Life of blades
(mm)
1.0
120
0.7
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Thickness gauge
•
Center blade
•
Side blade R
•
Side blade L
•
Hex wrench
•
Makita genuine battery and charger
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
(m)
(m)
50
8
accessories
or
attachments
persons.
Only use
are
accessory or