Makita BJV180 Informasi Teknis - Halaman 7

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita BJV180. Makita BJV180 13 halaman. Cordless jig saw
Juga untuk Makita BJV180: Perincian Bagian (3 halaman), Lembar Spesifikasi (2 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (18 halaman)

Halaman Cetak

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Gear Housing Cover Section (cont.)

ASSEMBLING

9) Lubricate the parts assembled to Gear housing cover

complete with reference to "Lubrication" in page 2.

10) While fitting Needle bearing 407 on Crank complete

in the groove portion of Slider, assemble Gear housing

cover section to Gear housing complete as illustrated

in Fig. 19.

Note: Do not forget to put Packing between Gear

housing cover complete and Gear housing.

(Fig. 7 in page 4)

[3] -3. Blade Holder

DISASSEMBLING

1) Take out Rod from Gear housing cover section. (Figs. 6, 7 in page 4; Figs. 8, 9, 10 in page 5)

2) Remove Dust cover and Retaining ring R-18 as illustrated in Fig. 20.

3) Blade holder and Torsion spring 15 can now be separated from Rod. (Fig. 21)

Note: Be careful not to lose Push pin.

Fig. 20

Dust cover

Rod

Retaining ring R-18

Blade holder

ASSEMBLING

1) Apply Makita grease FA No.2 to Push pin. Put Push pin in the hole of Rod, and assemble Torsion spring 15 to Rod

as illustrated in Fig. 22.

2) Put Rod on Blade holder while aligning Push pin with the mark on Blade holder. (Fig. 23)

3) Turn the outward bent end of Torsion spring in the direction of the arrow, and put in the protruding space of Blade

holder. (Fig. 24)

3) Secure Blade holder with Retaining ring R-18 using 1R311, then assemble Dust cover to Rod. (Fig. 20)

Fig. 22

Rod

Push pin

outward bent end

Insert the inward bent end of

Torsion spring 15 into the hole of Rod.

Fig. 23

Push pin

mark

inward bent end

Torsion spring 15

Blade holder

Fig. 19

groove portion

of Slider

Gear housing

cover complete

Gear housing cover section

Fig. 21

1R311

Push pin

Fig. 24

outward bent end

of Torsion spring 15

P 7/13

Needle bearing 407

Crank complete

Gear housing

complete

Torsion spring 15

Blade holder

protruding space