Makita BTW072 Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita BTW072. Makita BTW072 20 halaman. Equipped with electric brake
Juga untuk Makita BTW072: Buku Petunjuk (15 halaman), Buku Petunjuk (12 halaman), Informasi Teknis (10 halaman)

Halaman Cetak

3. Recharge of full charged battery

4. Over-discharge of battery (continue to discharge battery

in spite of down of power.)

5. Recharge under broken cooling system

The charging time of such battery is longer than usual.

Trickle charge (Maintenance charge)

If you leave the battery cartridge in the charger to prevent

spontaneous discharging after full charge, the charger will

switch into its "trickle charge (maintenance charge)" mode

and keep the battery cartridge fresh and fully charged.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely dis-

charged.

Always stop tool operation and charge the battery car-

tridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room temperature at

10°C - 40°C (50°F - 104°F).

Let a hot battery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery cartridge when

you do not use it for more than six months.

Refresh charging

Refreshing adapter (optional accessory) can refresh an inac-

tive battery cartridge.

•

Refresh charging should be done once a week.

•

When you charge a new battery cartridge or a battery

cartridge that has not been used for a long time, it may

not accept a full charge. In this case, refresh charging

must be done. The battery cartridge my decrease the

tool performance, because the chemical substance of

the battery cartridge is inactive.