Makita BTW072 Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita BTW072. Makita BTW072 20 halaman. Equipped with electric brake
Juga untuk Makita BTW072: Buku Petunjuk (15 halaman), Buku Petunjuk (12 halaman), Informasi Teknis (10 halaman)

Halaman Cetak
Makita BTW072 Buku Petunjuk
(C)
E
E
ON
2
3
1. Indicating lamp
2. Switch trigger
3. Battery cartridge
1
2
1. Tool housing
2. Screwdriver
12
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
•
When not operating the tool, always set the reversing
switch lever to the neutral position.
The remaining Battery capacity
001258
Auto-stop mechanism
F
The tool stops automatically (Red color lamp lights on) after
the battery capacity reaches under 20% to prevent the lack
of fastening torque. Charge the battery or use a new fully
F
charged one.
Auto-stop setting for number of impacts
This tool has a convenient auto-stop mechanism that allows
you to preset the desired number of impacts in terms of the
application. The tool then stops automatically after reaching
the preset number of impacts.
1. Pulling the trigger, insert the battery cartridge. Keep on
001259
pulling the trigger after inserting the battery cartridge.
1
(The indicating lamp on the back of the tool will flash
about 10 times, then the lamp will keep lighting up lit.)
2. Hit the tool housing around the grip once with a screw-
001260
driver etc. (The indicating lamp will go out.)