AVANTO CLIP-ON LIGHT PRO Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Peralatan Pencahayaan AVANTO CLIP-ON LIGHT PRO. AVANTO CLIP-ON LIGHT PRO 2 halaman.
Juga untuk AVANTO CLIP-ON LIGHT PRO: Panduan Pengguna (4 halaman)

Halaman Cetak

Please read these instructions carefully before use. To avoid

damage to the product and to prevent eye injury, the light should be

used according to the following guidelines.

OPEN THE CLASP

Open the clasp (A) and clip the

light to your pocket, shirt collar,

the waist of your shorts or pants,

or to a reflective vest. Note! For

the magnet to attach properly, the

attachment point must be a thin

fabric. Once you have attached

the light, shake it to ensure that

the attachment point is secure

and the light does not come off.

The light can be attached to

any magnetic metal to use as a

convenient task light.

POWER BUTTON

One-touch – light on, 100% power

(battery life approx. 3h)

Second press – light on, 70% power

(battery life approx. 4h)

Third press – light on, 50% power

(battery life approx. 5h)

Fourth press – SOS indicator

Fifth press – light off

CLIP-ON LIGHT PRO

Magnetic clasp (A)

Power button (B)

Charging socket (C)

CHARGING

The battery is charged at the factory and the

light comes ready to use. Open the protective

cover and connect the supplied USB cable to

the charging socket (C), then connect the other

end to a suitable USB power supply, such as a

phone charger or computer. Avoid high-power

chargers, which may damage the battery!

INSTRUCTIONS