照明器具 AVANTO CLIP-ON LIGHT PROのPDF 使用方法をオンラインで閲覧またはダウンロードできます。AVANTO CLIP-ON LIGHT PRO 2 ページ。
AVANTO CLIP-ON LIGHT PRO にも： ユーザーマニュアル (4 ページ)
ページを印刷するPlease read these instructions carefully before use. To avoid
damage to the product and to prevent eye injury, the light should be
used according to the following guidelines.
OPEN THE CLASP
Open the clasp (A) and clip the
light to your pocket, shirt collar,
the waist of your shorts or pants,
or to a reflective vest. Note! For
the magnet to attach properly, the
attachment point must be a thin
fabric. Once you have attached
the light, shake it to ensure that
the attachment point is secure
and the light does not come off.
The light can be attached to
any magnetic metal to use as a
convenient task light.
POWER BUTTON
One-touch – light on, 100% power
(battery life approx. 3h)
Second press – light on, 70% power
(battery life approx. 4h)
Third press – light on, 50% power
(battery life approx. 5h)
Fourth press – SOS indicator
Fifth press – light off
CLIP-ON LIGHT PRO
A
B
C
Magnetic clasp (A)
Power button (B)
Charging socket (C)
CHARGING
The battery is charged at the factory and the
light comes ready to use. Open the protective
cover and connect the supplied USB cable to
the charging socket (C), then connect the other
end to a suitable USB power supply, such as a
phone charger or computer. Avoid high-power
chargers, which may damage the battery!
INSTRUCTIONS