Garden Lights TIMER + SENSOR Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Beralih Garden Lights TIMER + SENSOR. Garden Lights TIMER + SENSOR 12 halaman.

INSTALLATION AV TIMER OCH TRANSFORMATOR

1. Cable to transformer.

2. Cable from the timer to the lights.

3. Display

4. Photo-cell

5. Up/Down Switch Setting

CHECK !

- This is a photo-timer switch which has been designed to be connected to 12 Volt Trans-

formers. This timer can be used for low voltage outdoor lighting.

- This timer can be installed in- and outdoor uncovered. When you install the timer indoor

you must take care that the timer can respond on dusk and dawn influences!

- This timer works at a temperature between -20°C and 50°C.

- Maximum Wattage to be connected to the timer is 150 Watt.

CONNECTION OF TIMER AND MAIN CABLE TO THE TRANSFORMER

- Connect the cable with the lights to the photo timer switch

- This timer should be screwed to the wall with the cable to be connected to the transfor-

mer pointing down.

- Connect the input cable of the photo timer switch to the transformer

- Insert the plug of the transformer into the electric outlet

OPERATION PROCEDURES:

Efter installationen är strömindikatorn på.

Timer switch is on, lights always burn.

Auto: From Dusk to Dawn automatically

Timer automatically switches on at Dusk. Timer will be switched on during the

time mentioned on the display (1-9)

With certain installation the lights should work now. If not, check the following

things:

- Connections between the main cable and the wire from the lamp.

- Check the lamps.

- When no single light is working, check the transformer and/or timer and let a specialist

measure them both.

FUSE

This timer is secured against short circuiting. - (250V - 20A)