Avantree Saturn Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penerima Avantree Saturn. Avantree Saturn 6 halaman. Bluetooth audio transmitter & receiver 2-in-1
Juga untuk Avantree Saturn: Panduan Pengguna (5 halaman)

Halaman Cetak
Avantree Saturn Panduan Pengguna
Please push the click button to TX mode from TX / RX positon, before power on. TX or RX mode can not be changed after powering on
Saturn.
Turn On: press and hold the MFB button for about 5 seconds until the blue LED is on for 1 second
Notice: For the first time use or first time turn on after clear connection list, transmitter Saturn will automatically enter into pairing
mode, the LED light flashes blue quickly.
Turn Off: press and hold the MFB button for about 3 seconds until the red LED is on for 1 second, and then go off.
5. Transmitter, Pairing with a Bluetooth device (Tutorial online)
After Saturn, under TX mode, has connected to bluetooth stereo device, you can stream music wirelessly. Before pairing, please make
sure your Bluetooth stereo receiver device supports Bluetooth A2DP profile. (Such as Bluetooth stereo headset Avantree Sacool,
Bluetooth speaker Avantree Pluto air.)
1) Pairing procedure:
A. Plug the 3.5 mm audio cable into Saturn's 3.5 mm audio socket, and plug the other end (or 2 x RCA which is red and white
connector ) into the audio output of audio source system （iPod, TV, Treadmill etc）.
B. Ensure Saturn has pushed into TX mode, and device is off.
C. Put Saturn and your Bluetooth stereo receiver device within 1 meter.
D. Power on your Bluetooth stereo receiver device and make it into pairing mode.
E. Press and hold MFB button of Saturn for around 5 -7 seconds till Blue LED light blinks quickly, which is in pairing mode.
(Note: For the first time use or first time power on after clear connection list, Saturn will automatically enter into pairing mode,
the Blue LED light blinks quickly.)
F. Saturn will then automatically search, pair and connect with your Bluetooth stereo receiver device.
G. After successful connection, the Blue LED light will flash twice every 4 seconds.
H. Pairing is completed, now you are able to enjoy the audio wirelessly.
Note:
1, Saturn will flash 3 times within 4 seconds in blue led after connected with other Bluetooth device which also support aptX codec.
Both transmitter and receiver are incorporated with aptX codec, it will help low latency and higher audio quality compare with
standard Bluetooth audio
2, The pairing mode will last 2 minutes. Saturn will enter standby mode if no devices can be connected with 2 minutes
3,Saturn can pair with stereo Bluetooth receiver devices with PIN code "0000", "1111", "8888" or "1234".
LED indicator instruction: