Avantree Saturn Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penerima Avantree Saturn. Avantree Saturn 6 halaman. Bluetooth audio transmitter & receiver 2-in-1
Juga untuk Avantree Saturn: Panduan Pengguna (5 halaman)
7.2 LED indicator instruction:
LED indicator
Blue and Red LED Blinks alternately and continuously
Blue LED flashes once every 1 seconds
Blue LED flashes twice every 4 seconds
Red Led blinks
7.3 Get maximum stable range.
Please kindly make sure there is no obstacle (wall corner etc.,) between receiver and transmitter; also make the 2 devices at the same
side.
8. Advanced Usage
8.1 Stream music
When Saturn is used as a receiver, you can connect it to a 3.5mm stereo headset or stereo speaker with a 3.5mm to 3.5mm audio
cable. Now you can listen to music and control pause / play of music
Function
Pause
Play
8.2 Charging and stream music
When battery is low but you still want to use Saturn either under TX or RX mode, you could be able to charge Saturn and stream
audio sound
8.3 Reconnecting to a Bluetooth device
A. Automatic connecting: Once Saturn is power on, it will automatically connected with the last connected device.
B.Manual connecting: When Saturn is in standby mode and doesn't connect to any device, short press MFB button once, it will
automatically connected to last connected device.
C. Auto off: Saturn will automatically power off if no devices can be connected within 5 minutes.
D.Clearing pairing list: Ensure Saturn is off, press and hold MFB button for around 10 -12 seconds till red LED is on for 1 second and
then Blue LED is on for 1 second.
9. Product Specification
Status of Saturn under RX mode
Pairing mode, last for 2 minutes
Standby mode and not connected with a device
Connect with a device
Low power
Status of the Saturn under RX mode
Playing music
Pausing
Operation
Short press MFB button once
Short press MFB button once