KitchenAid KEBS209BSS Panduan Pemasangan & Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Oven KitchenAid KEBS209BSS. KitchenAid KEBS209BSS 10 halaman. Built-in oven
Halaman Cetak
4. Install a front foot on the left front using a #8-18 x ³⁄₈" screw.
NOTE: Position the foot so the long side of the foot is facing
toward the inside of the oven.
A. Front foot
B. #8-18 x
C. Spacer
5. In the same manner, install a font foot on the right front of the
oven.
For Double Ovens
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
This oven is manufactured with a neutral (white) power supply
wire and a cabinet-connected green (or bare) ground wire twisted
together.
1. Disconnect power.
2. Feed the flexible conduit from the oven through the opening
in the cabinet.
3. Remove junction box cover, if it is present.
10
A
B
C
³⁄₈
" screw
Make Electrical Connection
6. Using 2 or more people, place the oven in its upright position.
7. Go to the "Make Electrical Connection" section.
For Single Ovens
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 12 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
4. Install a UL listed or CSA approved conduit connector to the
junction box.
A
A. UL listed or CSA approved conduit connector
5. Route the flexible conduit from the oven to the junction box
through a UL listed or CSA approved conduit connector.
6. Tighten screws on conduit connector.
7. See "Electrical Connection Options Chart" to complete
installation for your type of electrical connection.