KitchenAid KEBS209BSS Kurulum ve Kullanım Kılavuzu - Sayfa 9

Fırın KitchenAid KEBS209BSS için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. KitchenAid KEBS209BSS 10 sayfaları. Built-in oven

4. Install a front foot on the left front using a #8-18 x ³⁄₈" screw.

NOTE: Position the foot so the long side of the foot is facing

toward the inside of the oven.

A. Front foot

B. #8-18 x

C. Spacer

5. In the same manner, install a font foot on the right front of the

oven.

For Double Ovens

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death,

fire, or electrical shock.

This oven is manufactured with a neutral (white) power supply

wire and a cabinet-connected green (or bare) ground wire twisted

together.

1. Disconnect power.

2. Feed the flexible conduit from the oven through the opening

in the cabinet.

3. Remove junction box cover, if it is present.

³⁄₈

" screw

Make Electrical Connection

6. Using 2 or more people, place the oven in its upright position.

7. Go to the "Make Electrical Connection" section.

For Single Ovens

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 12 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death,

fire, or electrical shock.

4. Install a UL listed or CSA approved conduit connector to the

junction box.

A. UL listed or CSA approved conduit connector

5. Route the flexible conduit from the oven to the junction box

through a UL listed or CSA approved conduit connector.

6. Tighten screws on conduit connector.

7. See "Electrical Connection Options Chart" to complete

installation for your type of electrical connection.