Gardena 5031 Panduan Operator - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin Pemotong Rumput Gardena 5031. Gardena 5031 15 halaman. Electric lawnmower
Juga untuk Gardena 5031: Panduan Operator (10 halaman), Panduan Operator (10 halaman)

Halaman Cetak
Gardena 5031 Panduan Operator
To connect the
upper handle:
ß
S
t
4
5
6
5
3
1
1
To fix the cable
to the handle:
8
7
To assemble the grass box:
q
ß
C

3. OPERATION

Before you do operation:
16
1. Insert the cable lock
switch box
2. Put the upper handle
Make sure that the handles are fully in place and the handle holes
are inline.
3. Push the screws
4. Put the washers
5. Tighten the wing nuts
1. Fix the cable
2. Check that the cable
upper handle.
1. Turn the connector
2. Push the cover
0
Make sure that all connections are connected.
3. Push the handle
9
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from
the mains and use gloves before you connect or transport
the product.
(15)
to the upper handle
ß
.
S
(4)
on the lower handle
(5)
through the holes.
(3)
and the wing nuts
(6)
.
(7)
to the handle with the clips
(7)
is not trapped between the lower and the
ß
to the outside.
C
(10)
on the grass box
(11)
(10)
into the cover
(4)
with the
(1)
.
(6)
(5)
on the screws
.
(8)
.
(9)
until the connections click.
until it clicks.