Gardena 5031 Panduan Operator - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin Pemotong Rumput Gardena 5031. Gardena 5031 15 halaman. Electric lawnmower
Juga untuk Gardena 5031: Panduan Operator (10 halaman), Panduan Operator (10 halaman)

Halaman Cetak
Gardena 5031 Panduan Operator
a
p
To use the mower with
the grass box:
q
s
Tips to use the mower:

4. MAINTENANCE

Before you do maintenance:
To clean the product:
18
4. Pull the rear wheel axle
(21)
opening
.
5. Release the rear wheel axle
Make sure that the rear axle is fully released in the height adjust
opening.
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from
the mains and use gloves before you open the protective
flap
(22)
.
v Do not put your hands in the discharge opening.
Do not use the product without grass box.
9
1. Lift the protective flap
2. Put the grass box
Make sure that the grass box is securely connected.
3. Start the product.
4. Stop the product when the grass box
5. Lift the protective flap
6. Remove the grass box
7. Empty the grass box.
If grass residue is left in the discharge opening, pull the mower back-
wards about 1 m so that the grass residue can drop out downwards.
To produce a well-maintained lawn, we recommend to cut the lawn
regularly once a week if possible. The lawn becomes thicker if you
cut it frequently.
After relatively long cutting intervals (holiday lawn), first of all cut in
one direction with the highest cutting height and then cut in the
crosswise direction with the required cutting height.
If possible, only cut the grass when it is dry, if the grass is damp, the
cutting pattern will be uneven.
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from
the mains and use gloves before you do maintenance.
WARNING! Electric shock!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
(20)
out of the current height adjust
(20)
in the new height adjust opening
(22)
.
(9)
into the product by the handle
(9)
is completely filled.
(22)
.
(9)
of the product by the handle
(21)
.
(11)
.
(11)
.