Lexmark C925 Manual

Jelajahi secara online atau unduh pdf Manual untuk Printer Lexmark C925. Lexmark C925 14 halaman. Setup sheet
Juga untuk Lexmark C925: Panduan Administrator (20 halaman), Panduan Administrator (12 halaman), Manual Koneksi (7 halaman), Catatan Rilis (4 halaman), Panduan Administrator (13 halaman), Panduan Pemeliharaan (15 halaman), Panduan Administrator (12 halaman), Referensi Cepat (10 halaman), Manual Kertas (3 halaman), Menu Map (2 halaman), Memindahkan Manual (2 halaman), Manual Perlengkapan (2 halaman), Manual Informasi (1 halaman), Manual Cacat Cetak (1 halaman), Instalasi (2 halaman), Referensi Cepat (12 halaman), Pelatihan Layanan (18 halaman)

Halaman Cetak
Lexmark C925 Manual
Print quality guide
Many print quality problems can be solved by replacing a supply or maintenance item approaching the end of its intended
life. Check the printer control panel for a message about a printer supply.

Isolating print quality problems

Print the print quality test pages to help isolate print quality problems.
1
Turn the printer off.
2
Load letter- or A4-size paper in the tray or feeder.
3
Hold down
and
4
Release the buttons when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears.
5
Touch Print Quality Pages > Print Quality Pages.
The print quality test pages print.
6
Touch Back > Exit Config Menu.

Printer is printing blank pages

Try one or more of the following:
M
AKE SURE THERE IS NO PACKING MATERIAL LEFT ON THE TONER CARTRIDGE
Remove the toner cartridge and make sure the packing material is properly removed. Reinstall the toner cartridge.
M
AKE SURE THE TONER CARTRIDGE IS NOT LOW ON TONER
When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the toner cartridge:
1
Remove the toner cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3
Reinsert the toner cartridge.
Note: If print quality does not improve, replace the toner cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
6
MNO
while turning the printer on.
Print quality guide
Page 1 of 13