Lexmark C925 매뉴얼

{카테고리_이름} Lexmark C925에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark C925 14 페이지. Setup sheet
Lexmark C925에 대해서도 마찬가지입니다: 관리자 매뉴얼 (20 페이지), 관리자 매뉴얼 (12 페이지), 연결 매뉴얼 (7 페이지), 릴리스 노트 (4 페이지), 관리자 매뉴얼 (13 페이지), 유지 관리 매뉴얼 (15 페이지), 관리자 매뉴얼 (12 페이지), 빠른 참조 (10 페이지), 종이 매뉴얼 (3 페이지), 메뉴 맵 (2 페이지), 이동 매뉴얼 (2 페이지), 소모품 매뉴얼 (2 페이지), 정보 매뉴얼 (1 페이지), 인쇄 결함 매뉴얼 (1 페이지), 설치 (2 페이지), 빠른 참조 (12 페이지), 서비스 교육 (18 페이지)

Print quality guide

Many print quality problems can be solved by replacing a supply or maintenance item approaching the end of its intended

life. Check the printer control panel for a message about a printer supply.

Isolating print quality problems

Print the print quality test pages to help isolate print quality problems.

Turn the printer off.

Load letter- or A4-size paper in the tray or feeder.

Hold down

and

Release the buttons when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears.

Touch Print Quality Pages > Print Quality Pages.

The print quality test pages print.

Touch Back > Exit Config Menu.

Try one or more of the following:

AKE SURE THERE IS NO PACKING MATERIAL LEFT ON THE TONER CARTRIDGE

Remove the toner cartridge and make sure the packing material is properly removed. Reinstall the toner cartridge.

AKE SURE THE TONER CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the toner cartridge:

Remove the toner cartridge.

Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

Reinsert the toner cartridge.

Note: If print quality does not improve, replace the toner cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

MNO

while turning the printer on.

Print quality guide

Page 1 of 13