Avaya J129 Referensi Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Referensi Cepat untuk Telepon IP Avaya J129. Avaya J129 4 halaman. Ip office telephone
Juga untuk Avaya J129: Referensi Cepat (3 halaman), Referensi Cepat (5 halaman), Panduan Pengguna (4 halaman), Panduan Pengguna (6 halaman), Panduan Referensi Cepat (3 halaman), Referensi Cepat (4 halaman)
The phone displays the message Use dialpad to
search.
2. Press the digits on the dial pad that correspond to the
letters of the name of the person you want to call.
For example, press 764 to search for someone whose
name is Smith.
3. Press one of the following to start a call to the
selected number:
• Call
• OK
Making a call from the call history
Use this procedure to make a call from the call history. If
the system administrator has configured emergency
calling for your phone, Emerg softkey replaces the
Recents softkey.
1. On the phone, navigate to Main Menu > Recents,
and press Select.
2. Use the Up and Down arrow keys to select the
number that you want to call.
3. Press one of the following to start a call:
• Call
• OK
Making an emergency call
Ensure that the Emerg softkey is assigned by your
administrator.
Do one of the following:
• On the Phone screen, press the Emerg softkey,
and again press Emerg when the phone prompts
you for confirmation.
• Dial the emergency number by using the dial pad.
Making an attended transfer
An attended transfer is when you put an active call on
hold and establish a second call with the call-transfer
recipient before transferring the call.
1.
2. Do one of the following:
• Use the keypad to dial the number to which you
want to transfer the call .
The first call is put on hold, and the recipient's phone
starts ringing.
Making an unattended transfer
An unattended transfer is when you transfer an active call
without establishing a call with the call-transfer recipient.
1.
2. Do one of the following:
• Use the keypad to dial the number to which you
want to transfer the call.
The first call is put on hold, and the recipient's phone
starts ringing.
Call forward
Activating and deactivating Call Forward
Ensure that the system administrator enables Call
Forward features for your extension.
1. Press Main Menu > Features.
2. Use the Down Arrow key to go to one of the following
Call Forward screens.
• Call Fwd
• Call Forward-Busy
• Call Forward-No Answer
3. Press Select or OK.
4. In the Destination field, enter the number where you
want to forward the incoming calls.
5. Press Save or OK.
The phone generates a confirmation tone and returns
to the Features menu.
6. To deactivate any of the Call Forward feature, go to
the respective screen and press Select or OK.
Simultaneous Ring Personal
With the Simultaneous Ring Personal (SRP) feature, you
can list up to 10 phone numbers or SIP-URI addresses
you want to receive calls to in addition to your primary
phone. This feature may be used when, for example, you
are not at your desk phone and you need to answer a call
from your cell phone. Simultaneous ring can be turned off
when you are at your desk on a call.
Important:
If your cell phone has the voice mail which is activated
before your office voice messaging, the voice
messages will be recorded in your cell phone
database.
Note:
If Simultaneous Ring Personal is activated, the
corresponding LED on the phone is green. If the
feature is disabled, the LED is red. Contact your
system administrator or go to the BroadSoft web
interface yourself to activate the feature. See
www.broadsoft.com/
for more information.
Accessing Simultaneous Ring Personal
from the phone menu
Use this task to access Simultaneous Ring Personal page
from the phone menu for configuring the settings, viewing
and editing the list of simultaneous ring numbers.
1. On the phone, go to Main menu > Features.
2. Scroll to Simultaneous ringing, and press Config.
Disabling Simultaneous Ring Personal
during an active call
Use this procedure to turn off Simultaneous Ring Personal
when you are on an active call.
1. On the phone, go to Main menu > Features >
Simultaneous ringing.
2. On the Simultaneous ringing page, scroll to Do not
ring with active call.
3. Press Toggle to disable or enable the setting.
The changes will be saved automatically.
Adding a Simultaneous Ring number
Use this procedure to add a number or a SIP-URI address
for a simultaneous ring.
Important:
You can add maximum 10 numbers or SIP-URI
addresses.
1. On the phone, go to Main menu > Features >
Simultaneous ringing.
2. On the Simultaneous ringing page, scroll to Numbers,
and press Select.
3. Press Add.
4. In the Add number window, scroll to the Phone
number or SIP-URI field, and enter the number digits
or a SIP-URI address:
• Press Abc or 123 to enter letters or numbers.
• Press Backspace to delete the symbols entered.
5. (Optional) Scroll to the Answer conformation
required, and press Toggle to toggle the setting to on
or off.
6. Press Save.
Editing Simultaneous Ring numbers
https://
2