Gardena 1820 Panduan Petunjuk Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Rumput dan Taman Gardena 1820. Gardena 1820 16 halaman. Water timer electronic t14 e
Juga untuk Gardena 1820: Panduan Petunjuk Pengoperasian (10 halaman), Panduan Petunjuk Pengoperasian (9 halaman), Panduan Petunjuk Pengoperasian (15 halaman)

Adaptor for G 3 /4 thread (26.5 mm)

The adaptor supplied allows the Water Timer to be connected to taps with

a G 3 /4 thread (26.5 mm). If you are using the adaptor, screw the adaptor

onto the tap before screwing the Water Timer onto the adaptor.

Warning ! Attach and screw on manually. Do not use pliers !

6.3 Function Keys and Display (Fig. C)

Note : The Water Timer control unit

you to set the watering program somewhere other than where the Water

Timer is to be used.

Menu-O.K.

➔ Changes to the next stage of the program. Simultaneously accepts

and confirms the data you have entered using the man. key.

On / Off-man.

➔ Used to change the individual data (e.g. counting hours, minutes, ...)

➔ To switch a connected watering system on and off manually.

Note :

In the entry mode the corresponding display flashes.

At high temperatures (over 60 °C at the display) the LCD may extinguish.

This has no effect on the program sequence. Once the LCD display

cools down, the display will appear again.

Status display – The connected watering system is active.

Off

Status display – The connected watering system is inactive.

Time (current time)

➔ In the programming mode :

Start

➔ Starting time; when the watering system becomes active.

Hours – Hour when devices become active

Minutes – Minutes when devices become active

Cycle

Displays selected program.

can be removed (Fig. B). This allows

Hours – Hours of the current time

Minutes – Minutes of the current time