Gardena 1820 사용 설명서 - 페이지 6
{카테고리_이름} Gardena 1820에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1820 16 페이지. Water timer electronic t14 e
Gardena 1820에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지), 사용 설명서 (9 페이지), 사용 설명서 (15 페이지)
페이지 인쇄
Adaptor for G 3 /4 thread (26.5 mm)
The adaptor supplied allows the Water Timer to be connected to taps with
a G 3 /4 thread (26.5 mm). If you are using the adaptor, screw the adaptor
onto the tap before screwing the Water Timer onto the adaptor.
Warning ! Attach and screw on manually. Do not use pliers !
6.3 Function Keys and Display (Fig. C)
Note : The Water Timer control unit
you to set the watering program somewhere other than where the Water
Timer is to be used.
Menu-O.K.
➔ Changes to the next stage of the program. Simultaneously accepts
and confirms the data you have entered using the man. key.
On / Off-man.
➔ Used to change the individual data (e.g. counting hours, minutes, ...)
➔ To switch a connected watering system on and off manually.
LCD Display
Note :
In the entry mode the corresponding display flashes.
.
At high temperatures (over 60 °C at the display) the LCD may extinguish.
.
This has no effect on the program sequence. Once the LCD display
cools down, the display will appear again.
On
Status display – The connected watering system is active.
Off
Status display – The connected watering system is inactive.
Time (current time)
➔ In the programming mode :
Start
➔ Starting time; when the watering system becomes active.
Hours – Hour when devices become active
Minutes – Minutes when devices become active
Cycle
Displays selected program.
1
can be removed (Fig. B). This allows
Hours – Hours of the current time
Minutes – Minutes of the current time
35