Lexmark Monochrome Laser Manual Koneksi - Halaman 10

Jelajahi secara online atau unduh pdf Manual Koneksi untuk Printer Lexmark Monochrome Laser. Lexmark Monochrome Laser 19 halaman. Maintenance guide
Juga untuk Lexmark Monochrome Laser: Panduan Pengguna (6 halaman), Lembar Spesifikasi (1 halaman), Panduan Tambahan (5 halaman), Mengatasi Kemacetan Kertas (2 halaman), Membersihkan Kemacetan Secara Manual (2 halaman), Manual Pencetakan (17 halaman), Memperbarui (1 halaman), Manual Koneksi (5 halaman), Manual Informasi (1 halaman), Referensi Cepat (1 halaman), Panduan Pemeliharaan (11 halaman), Lembar Instalasi (1 halaman), Panduan Pemeliharaan (10 halaman)

6 Squeeze the side guide tab, and slide the guide until it lightly rests against the edge of the paper.

7 Insert the tray into the printer.

For loading other sources, see "For more information" on page 4.

Setting the Paper Type and Paper Size

After setting the Paper Type and Paper Size to the correct values for the type and size used in the trays, then any

trays containing the same size and type are automatically linked by the printer.

Note: If the size of the media you are loading is the same size of the media previously loaded, do not

change the Paper Size setting.

To change the Paper Size and Paper Type setting:

1 Make sure the printer is on and the Ready message appears.

2 Press

until

appears beside Paper Menu, and then press .

3 Press

until

appears beside Paper Type (or Paper Size), and then press

4 Press

until

appears beside Tray x Type (or Tray x Size), and then press

5 Press

to scroll through a list of possible paper types (or sizes) to locate the correct type or size. Make

sure the type or size is highlighted with

as the new user default type or size setting.

The message Submitting Selection appears. The printer returns to the Ready state.

beside it, and then press then press

Printing guide

Page 3 of 4

. This saves this setting