- ページ 10

プリンター Lexmark Monochrome LaserのPDF 接続マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark Monochrome Laser 19 ページ。 Maintenance guide
Lexmark Monochrome Laser にも：ユーザーマニュアル (6 ページ), 仕様書 (1 ページ), 補足マニュアル (5 ページ), 紙詰まりの解消 (2 ページ), ジャム除去マニュアル (2 ページ), 印刷マニュアル (17 ページ), 更新 (1 ページ), 接続マニュアル (5 ページ), 情報マニュアル (1 ページ), クイック・リファレンス (1 ページ), メンテナンス・マニュアル (11 ページ), 設置シート (1 ページ), メンテナンス・マニュアル (10 ページ)

6 Squeeze the side guide tab, and slide the guide until it lightly rests against the edge of the paper.

7 Insert the tray into the printer.

For loading other sources, see "For more information" on page 4.

Setting the Paper Type and Paper Size

After setting the Paper Type and Paper Size to the correct values for the type and size used in the trays, then any

trays containing the same size and type are automatically linked by the printer.

Note: If the size of the media you are loading is the same size of the media previously loaded, do not

change the Paper Size setting.

To change the Paper Size and Paper Type setting:

1 Make sure the printer is on and the Ready message appears.

2 Press

until

appears beside Paper Menu, and then press .

3 Press

until

appears beside Paper Type (or Paper Size), and then press

4 Press

until

appears beside Tray x Type (or Tray x Size), and then press

5 Press

to scroll through a list of possible paper types (or sizes) to locate the correct type or size. Make

sure the type or size is highlighted with

as the new user default type or size setting.

The message Submitting Selection appears. The printer returns to the Ready state.

beside it, and then press then press

Printing guide

Page 3 of 4

. This saves this setting