Avaya IP OFFICE 2420 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Avaya IP OFFICE 2420. Avaya IP OFFICE 2420 6 halaman. Avaya ip office 2420 quick reference guide
Juga untuk Avaya IP OFFICE 2420: Panduan Pengguna (5 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna Akhir (19 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (5 halaman), Panduan Referensi Cepat (7 halaman), Panduan Pengguna (9 halaman), Panduan Referensi Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Referensi Cepat (4 halaman), Manual (6 halaman), Petunjuk Instalasi dan Keselamatan (17 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman)

PROBLEM: THE 2420 TELEPHONE DOES NOT HAVE DIAL TONE

Make sure the handset and line cords at your 2420 telephone are securely connected at both ends.

If there is still no dial tone, check with your system manager to verify that your telephone is administered

correctly.

If the telephone is administered correctly but there is still not dial tone, remove power. Remove the module

and refer to the 20-Type Stand, 200-Type Module Analog (U.S.) Adjunct Interface, and 201-Type Module

Recorder Interface Installation and Safety Instructions (555-233-132). If the 2420 telephone, without the

module, has dial tone, connect the module to another telephone.

a. If the module works in the new telephone, the 2420 telephone to which the module was originally

connected is faulty.

b. If the new 2420 telephone, after the module has been connected, does not work, the module is faulty.

If the original 2420 telephone, without the module, still does not work, find a working 2420 telephone. Unplug

this telephone from its modular wall jack. Plug your 2420 telephone into that jack and verify that it gets dial

tone.

If the original 2420 telephone still does not work, plug the working 2420 telephone into your modular wall jack.

If the working 2420 telephone has dial tone, your own telephone is faulty. See your system manager.

Problems Related to External Recorders

The following problems may occur with some external recording devices connected to the 201-type module.

PROBLEM: RECORDING DEVICE DOES NOT START OR STOP

The recording device should be set to "voice activated" mode. Refer to the recording device's user instructions.

PROBLEM: LEVEL OF RECORDING IS TOO LOW OR HIGH

Adjust the volume control on the 2420 telephone during the recorded conversation. A recording device with AGC

(Automatic Gain Control) is recommended.