Gardena PowerJet Li-40 Panduan Operator - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Operator untuk Blower Gardena PowerJet Li-40. Gardena PowerJet Li-40 18 halaman. Battery blower / vacuum
Juga untuk Gardena PowerJet Li-40: Panduan Operator (18 halaman), Panduan Operator (18 halaman)

Halaman Cetak

1. Troubleshooting

Assembling for vacuum mode:

2 q

3. OPERATION

To charge the battery:

DANGER! Cut injury!

v Assemble the vacuum tube and the collection bag

To assemble the vacuum tube:

DANGER! Cut injury!

v Assemble both parts of the vacuum tube before you

Note: When the vacuum tube is not assembled correctly to the

vacuum, a safety switch will prevent the vacuum from starting.

1. Connect both parts (

connection audibly engages.

2. Tighten the screw

3. Push the vacuum tube

interlock

To remove the vacuum tube

vacuum tube

To assemble the collection bag:

Note: When the collection bag is not assembled correctly, a safety

switch will prevent the vacuum from starting.

1. Push the collection bag

interlock

2. Connect the collection bag strap

3. Connect the shoulder strap

4. Make sure that the earthing strap

5. Make sure that the collection bag

To remove the collection bag

collection bag

DANGER! Risk of injury!

Cut injury when the rotor blades turn or the product

starts accidentally.

v Remove the battery and wait for the rotor blades to stop

before you adjust or transport the product.

CAUTION!

Overvoltage damages the battery and the battery

charger.

v Make sure that you use the correct mains voltage.

For the GARDENA Battery Blower/Vacuum Art. 9338-55 there

is no battery in the scope of delivery.

completely before you use the product in vacuum

mode.

start the product.

) of the vacuum tube

into the vacuum inlet

audibly engages.

push the interlock

onto the vacuum outlet

audibly engages.

with the retainer

push the interlock

until the

and remove the

until the

with the retainer

is in touch with the ground.

is completely closed.

and remove the