Alinco DJ-191 Referensi Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Referensi Cepat untuk Transceiver Alinco DJ-191. Alinco DJ-191 3 halaman. Cert communications team procedures
Juga untuk Alinco DJ-191: Buku Petunjuk (18 halaman), Buku Petunjuk (18 halaman), Referensi Cepat (4 halaman)

Halaman Cetak

CERT Communications Team Procedures

Alinco DJ-191 QUICK REFERENCE

Revised 08/18/2000

6. The offset frequency 0.60 should be displayed. If not, rotate the knob on the top

of the radio until it is.

7. Press PUSH-TO-TALK briefly to exit 'offset set mode'. The PUSH-TO-TALK

button, labeled PTT, is the largest button in the center of the left side of the

radio.

8. If a tone (PL) is required, press and hold the FUNCTION button, then press the

4 key. (The 4 key is also labeled T SQL for Tone Squelch.) Release the

Function button. A

proper tone frequency is displayed. Press PUSH-TO-TALK briefly to exit 'tone

set mode'.

9. Listen. If the frequency is not being used, press the PUSH-TO-TALK button.

Take a breath and speak slowly and distinctly across the microphone. The

microphone is located in the lower-right corner of the radio.

is displayed. Rotate the knob on top of the radio until the

CERT Comm, Fremont, CA.