Alinco DJ-191 Hızlı Referans - Sayfa 3

Alıcı-Verici Alinco DJ-191 için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Alinco DJ-191 3 sayfaları. Cert communications team procedures
Ayrıca Alinco DJ-191 için: Kullanım Kılavuzu (18 sayfalar), Kullanım Kılavuzu (18 sayfalar), Hızlı Referans (4 sayfalar)

Sayfayı Yazdır

CERT Communications Team Procedures

Alinco DJ-191 QUICK REFERENCE

Revised 08/18/2000

6. The offset frequency 0.60 should be displayed. If not, rotate the knob on the top

of the radio until it is.

7. Press PUSH-TO-TALK briefly to exit 'offset set mode'. The PUSH-TO-TALK

button, labeled PTT, is the largest button in the center of the left side of the

radio.

8. If a tone (PL) is required, press and hold the FUNCTION button, then press the

4 key. (The 4 key is also labeled T SQL for Tone Squelch.) Release the

Function button. A

proper tone frequency is displayed. Press PUSH-TO-TALK briefly to exit 'tone

set mode'.

9. Listen. If the frequency is not being used, press the PUSH-TO-TALK button.

Take a breath and speak slowly and distinctly across the microphone. The

microphone is located in the lower-right corner of the radio.

is displayed. Rotate the knob on top of the radio until the

CERT Comm, Fremont, CA.