Garmin Nuvi 775t - hiking gps receiver Panduan Memulai Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Navigasi Mobil Garmin Nuvi 775t - hiking gps receiver. Garmin Nuvi 775t - hiking gps receiver 9 halaman. Nuvi 7 series declaration of conformity
Juga untuk Garmin Nuvi 775t - hiking gps receiver: Suplemen Panduan Pemilik (8 halaman), Informasi Keamanan dan Produk (32 halaman), Pernyataan Kesesuaian (1 halaman)
Halaman Cetak
Step 1: Mount the nüvi
1. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
2. Place the suction cup on the windshield.
3. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
Cradle
4. Snap the cradle onto the suction cup
arm.
Suction cup mount
5. Flip the lever back, toward the
windshield.
6. Fit the bottom of your nüvi into the
cradle.
Power cable
7. Tilt the nüvi back until it snaps into place.
8. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and your vehicle is running.
9. If you are using a traffic receiver in
Europe, secure the antenna on the
traffic receiver to the windshield using
the suction cups. (The traffic receiver is
included in some nüvi packages.)
Step 2: Configure the nüvi
To turn on your nüvi, slide the
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the nüvi.
Power