Garmin Nuvi 775t - hiking gps receiver 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Garmin Nuvi 775t - hiking gps receiver에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Nuvi 775t - hiking gps receiver 9 페이지. Nuvi 7 series declaration of conformity
Garmin Nuvi 775t - hiking gps receiver에 대해서도 마찬가지입니다: 사용 설명서 부록 (8 페이지), 안전 및 제품 정보 (32 페이지), 적합성 선언 (1 페이지)
페이지 인쇄
Step 1: Mount the nüvi
1. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
2. Place the suction cup on the windshield.
3. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
Cradle
4. Snap the cradle onto the suction cup
arm.
Suction cup mount
5. Flip the lever back, toward the
windshield.
6. Fit the bottom of your nüvi into the
cradle.
Power cable
7. Tilt the nüvi back until it snaps into place.
8. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and your vehicle is running.
9. If you are using a traffic receiver in
Europe, secure the antenna on the
traffic receiver to the windshield using
the suction cups. (The traffic receiver is
included in some nüvi packages.)
Step 2: Configure the nüvi
To turn on your nüvi, slide the
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the nüvi.
Power